Parts

Tools of the Trade

The creator of the original Paint Gun Washer, Herkules also offers the parts shops need to keep their paint gun washers working great. Parts are available on-line, and ship weekdays (holidays excluded) from Walled Lake, Michigan. Popular paint gun washer parts are found below;  if a needed part not found on this page, contact Herkules Customer Service at 1-800-444-4351.

  1. Section

    ca01_01_herkules_coagent_41

    $59.00

    CoAgent quickly and effectively separates used paint from cleaning water or cleaning solution for proper waste disposal. Partner with the Herkules R500, with Herkules Paint Gun Washers G511, G520 and G550, or use with other paint gun cleaners for efficient paint flocculation.

    CoAgent Safety Data Sheet

  2. Section

    15171_02_herkules_paint_gun_washer_maintenance_kit_41

    $755.00

    The Herkules Maintenance Kit (#15171) contains the most popular and commonly-used replacement
    parts by our Paint Gun Washer users. This kit features the fifteen (15) of the most frequently
    purchased components used to modify,repair or just basically tune-up Herkules Paint Gun Washers.

    This easy-to store pack keeps these parts ready for quick access, reducing both downtime and cost—
    with a significant savings over purchasing and shipping parts individually.

    The kit provides these parts: 12509 (2) air cap assembly, 1002651 (2) e-rings, C9A (2) nipple 1/8 NPT x 4 ½ brass, 22GW (2) trigger lock assembly, M1C (1) limit valve, 54P1 (12) white fulljet nozzle, 53A (4) stem support male, 53B (4) stem support female, M230-002 (1) knob for mechanical timer,12491 (1) filter for pump inlet, 1001441 (1) muffler for 338 pump, 11345 (1) filter regulator, M5 (36”) Blue tube 5/32, M230-001A (1) mechanical timer without knob, and M5-black (36”) Black tube 5/32.

     

     

  3. Section

    11981_01_herkules_pump_replacement_kit_41

    $1050.00

    Replacing a piston pump with a diaphragm pump is simplified with the 11981 kit. Paint gun washers currently using a piston pump are easily upgraded to our powerhouse 338 pump with this kit, which also includes a solvent intake filter, two nuts, two flat washers, two lock washers two nylon spacers, two steel tubes  with flare nuts and an operating instructions decal for the washer lid.

  4. Section

    The 11972 kit from Herkules enables paint gun washers with the 10686 or 314 pump to be upgraded by installing the 338 pump. This kit includes not only the 338 pump, but also the inlet and outlet hose assemblies, fittings, connector, elbow and nylon tube needed to simplify installation.

     

  5. Section

    10792_01_herkules_10686_pump_rebuild_kit_41

    $215.00

    The 10792 kit provides fittings to refurbish the 10686 pump. The kit includes four check valves, two diaphragms and two large O-rings, two small O-rings and a slide valve assembly.

    Another option for paint gun washers using the 10686 pump is to upgrade to a 338 pump; see the 11972 kit listing for more information.

  6. Section

    12164_02_herkules_o500_pump_conversion_kit_41

    $1008.00

    Also known as the O500 Pump Conversion Kit, the 12164 kit from Herkules enables paint  gun washers that use the 318 pump to be retrofitted with the 338 Pump, which is included in the package.

    Other fittings in the kit include the pump bracket and assembly, the filter/regulator, filter assembly, drain hose assembly, flare connector, hoses, washers, bolts and nuts, washers, plug and a bulkhead.

  7. Section

    The 318 replacement pump is available, and should be used for rinsing operations only, not to power washing operations.

    We recommend that the user upgrade to the 338 pump for washing operations.

    To upgrade to the 338 pump, purchase the #12164 – O500 Pump Conversion Kit.  More information about the kit can be found in section 4 above.

    Contact Herkules at 1-800-444-4351 for more information.

  8. Section

    The 338 diaphragm pump powers most of our current Herkules Paint Gun Washers. This powerful device can also be retro-fitted to many older Herkules paint gun washers; if only a replacement pump is needed, order this pump buy selecting “Add to Cart.”

    If retrofitting the 338 pump into a unit that currently uses an older Herkules pump, please order the pump kit that contains not only the pump, but also the components needed for easy installation. For help determining the correct kit, scroll down to each kit and it’s explanation, or visit our Frequently Asked Questions page for detailed information.

  9. Section

    14600_01_herkules_gun_washer_pump_41

    $498.00

    This powerful pump handles both solvent and waterborne paint and is used exclusively in the G507 Paint Gun Washer.

  10. Section

    338-kit-01_01_herkules_338_pump_rebuild_kit_41

    $355.00

    The 338_KIT-01 is for rebuilding a 338 pump. The kit does NOT include a new 338 Pump but provides two diaphragms, eight O-rings, lubricant, and four each of the following: seals, balls, and ball guides, along with detailed directions on how to refurbish a current 338 Pump and extend its lifecycle.

  11. Section

    1001441_01_herkules_spray_gun_washer_muffler_41

    $22.00

    The 1001441 brass muffler is used on the 338 pump.

  12. Section

    1003560_01_herkules_spray_gun_washer_338_diaphragm_pump_manifold_41

    $164.00

    This “dog bone” shaped manifold (part #1003560) is easily replaced on the popular Herkules 338 Pump, increasing the pump’s life cycle.

  13. Section

    22gw_01_herkules_paint_gun_washer_trigger_lock_41

    $68.00

    The 22GW is the trigger lock assembly with e-clips used in most Herkules paint gun washers. This assembly includes the standard trigger lock assembly (#22BA) and an e-clip (#1002651).

  14. Section

    23k_01_herkules_manifold_adapter_kit_for_gravity_feed_spray_paint_guns_41

    $185.00

    The 23K is a manifold adapter kit. This optional kit provides alternative positioning of gravity fed paint guns during cleaning.

     

  15. Section

    53a_02_herkules_paint_gun_washer_male_step_support_collision_shop_41

    $34.00

    The male stem support (53A) is compatible with Herkules Paint Gun Washers.

  16. Section

    53b_01_herkules_spray_gun_washer_female_stem_support_41

    $34.00

    The 53B female stem support is compatible with Herkules paint gun washers.

  17. Section

    c9a_01_herkules_paint_gun_washer_support_nipple_41

    $35.00

    The C9A support nipple is 4-1/2″ tall, and supports 53B (Female stem support).

  18. Section

    54_01_herkules_paint_gun_washer_brass_nozzle_auto_body_shop_41

    $18.00

    The 54 is the 1/8″ brass nozzle for use on the paint gun washer’s spray manifold.

  19. Section

    54p1_01_herkules_spray_gun_washer_manifold_nozzle_auto_body_41

    $18.00

    The 54 is the 1/8″ plastic nozzle for use on the paint gun washer’s spray manifold.

  20. Section

    12490_01_herkules_paint_gun_washer_g200_manifold_41

    $580.00

    The 12490 Spray manifold assembly is compatible with the Herkules G200, G202 and G205 paint gun washers.

  21. Section

    12491_01_herkules_spray_paint_gun_solvent_filter_auto_body_shop_41

    $105.00

    The 12491 filter assembly for solvent paint gun washers includes the filter and a stainless steel clamp to simplify installation.

  22. Section

    12129_01_herkules_paint_gun_washer_g100_manifold_41

    $430.00

    The 12129 manifold assembly is used in both the G100 and the retired O500 paint gun washers.

  23. Section

    12509_01_herkules_air_cap_for_gravity_or_suction_feed_paint_guns_41

    $67.00

    The 12509 air cap assembly includes the air cap, e-clip and stainless steel cable mount.

  24. Section

    14985_01_herkules_four_paint_gun_washer_conversion_41

    $345.00

    The 14985 four paint gun washing conversion kit enables a unit that currently washes two guns a cycle to be upgraded with the ability to clean four guns a cycle. The G200, G202, G205, G210 and G415 can be adapted using this kit.

     

  25. Section

    19453_01_herkules_spray_gun_washer_nozzle_collision_shop_41

    $46.00

    The 19453 nozzle replacement assembly is for the black nozzle used on the G45, G507, G520 and G550, and includes two parts: the rubber nozzle (#1004269), and the threaded insert (#1004790).

  26. Section

    19454_01_herkules_spray_gun_washer_nozzle_insert_push_valve_41

    $135.00

    The 19454 nozzle replacement assembly is for the black nozzle used on the G45, G507,  G520 and G550 paint gun washers, and  includes three parts: the rubber nozzle (#1004269), the threaded insert (#1004790) and the push valve (#1003502).

     

  27. Section

    13800_01_herkules_air_gun_assembly_paint_gun_washer_41

    $180.00

    The 13800 air gun assembly can be added to the G507, G511, G520 and G550 paint gun washers. The assembly includes a blue air gun and fittings.

  28. Section

    10737_01_herkules_paint_gun_washer_brush_with_hose_auto_body_shop_41

    $195.00

    The 10737 brush assembly  includes the brush, hose, fittings and valve to incorporate into the G202, G375 or G415 paint gun washer.

  29. Section

    19982_01_herkules_brush_assembly_with_hose_41

    $195.00

    The 19982 brush assembly  includes the brush, hose, fittings and valve to incorporate into the G520 and G550 paint gun washers.

  30. Section

    19481_01_herkules_paint_gun_washer_brush_with_hose_41

    $201.00

    The 19481 brush assembly  includes the brush, hose, fittings and valve for the G511 paint gun washer.

  31. Section

    11238_01_herkules_spray_gun_washer_38_psi_filter_regulator_auto_body_shop_41

    $222.00

    The 11238 filter regulator is 1/4″ npt and set to 38 psi for use in the O500 (retired) paint gun washer.

  32. Section

    11345_01_herkules_spray_gun_washer_75_psi_filter_regulator_auto_body_shop_41

    $210.00

    The 11345 filter regulator is 1/4″ npt and set to 75 psi, and is the new number for part T17M.

  33. Section

    19196_01_herkules_paint_gun_washer_lid_auto_body_shop_41

    $255.00

    The 19196 lid assembly contains the lid, handle and hardware, and is compatible to all of the Herkules Paint Gun Washer G200 series: G200, G202, G205 and G210.

  34. Section

    13596_01_herkules_paint_gun_washer_mechanical_cam_timer_collision_shop_41

    $270.00

    The 13596 timer assembly includes the mechanical timer (#1007592), timer cam (M230-003), timer knob (#M230-002) and hardware needed to replace the Herkules paint gun washer timer system.

  35. Section

    13939_02_herkules_paint_gun_washer_g507_five_gallon_upgrade_41

    $425.00

    The 13939 five (5) gallon upgrade offers two larger containers and the hoses and fittings that easily integrate with the Herkules G507.

  36. Section

    14141_02_herkules_paint_gun_washer_air_whip_line_auto_body_shop_41

    $105.00

    The 14141 air whip line kit offers a 36″ hose and fittings for use with the Herkules G511, G520 and G550 paint gun washers.

  37. Section

    mc1_01_herkules_paint_gun_washer_pneumatic_limit_valve_41

    $120.00

    The M1C limit valve controls the follow of the compressed air that powers most Herkules paint gun washers.

  38. Section

    19482_01_herkules_paint_gun_washer_blue_hose_5_ft_41

    $36.00

    The 19482 blue 5/32″ hose is sold in a five (5) foot coil.

  39. Section

    19483_01_herkules_paint_gun_washer_black_hose_5_ft_41

    $36.00

    The 19483 black 5/32″ hose is sold in a five (5) foot coil.

  40. Section

    1002914_01_herkules_paint_gun_washer_five_gallon_pail_41

    $21.00

    The 1002914 five (5) gallon wash and rinse pail is plastic, and is used with the Herkules G511 ,G520 and G550 Paint Gun Washers.

  41. Section

    13835_01_herkules_spray_gun_washer_inner_filter_bag_auto_body_shop_41

    $82.00

    The set of Inner Filter Bag for waterborne recycling (#13835) includes five bags in each package. This filter bag catches the waterborne paint waste so the paint can be disposed of properly. This filter’s mesh is 400 microns and can be re-used up to 25 filter processes.

    The filtering ability of Herkules Filter Bags, coupled with their strength and durability, enable swift and thorough cleaning and recycling. The two bag system works in tandem to help ensure quick, yet high quality, filtration. These filters can be used with Herkules Paint Gun Washers G511, G520, G550, or with other brand name paint gun washers.

     

  42. Section

    13836_01_herkules_spray_gun_washer_outer_filter_bag_auto_body_shop_41

    $82.00

    The Outer Filter Bags (#13836) for waterborne recycling include five bags in each package. This filter bag catches the residual paint waste left in the cleaning solution after going through the inner filter bag; it’s mesh is 25 microns and the bag can be re-used for more than 25 filter processes.

    The filtering ability of Herkules Filter Bags, coupled with their strength and durability, enable swift and thorough cleaning and recycling. The two bag system works in tandem to help ensure quick, yet high quality, filtration. These filters can be used with Herkules Paint Gun Washers G511, G520, G550, or with other brand name paint gun washers.

  43. Section

    sc06_01_herkules_sparkle_clean_41

    $59.00

    The paint cleaner in an aerosol can, Sparkle Clean is formulated for use with either Solvent or Waterborne paints. Use Sparkle Clean to spot clean spray guns –and other paint equipment –throughout the day. Each 15 ounce aerosol can has two stream options: wide or narrow– enabling users to target a wide area, or focus on narrow chamber, with the flip of the lid.

    Marked for individual sales for retailers as SC01, Sparkle Clean is only available by the 6-can case from Herkules (SC06).

    This product must be shipped UPS Ground.

    WARNING: This product cannot be purchased for use in the State of California, due to its Prop 65 regulations.

     

    Sparkle Clean Data Sheet

  44. Section

    scb06_01_herkules_sparkle_clean_blast_41

    $59.00

    Containing the same highly effective Sparkle Clean formula, but equipped with a special valve for easy attachment to the Herkules G45 FastTrack Paint Gun Washer, BLAST effectively cleans both waterborne and solvent paint — 20 to 30 spray gun cleanings in each 13 ounce aerosol can. Six cans in a case, like all other Herkules products, it is proudly made in the USA.

    This product can only be shipped UPS Ground.

    WARNING: This product cannot be purchased for use in the State of California, due to its Prop 65 regulations.

    Sparkle Clean Blast Data Sheet

  45. Section

    The 318 pump is used for clean rinsing operations. This is not to be used for power washing operations. The 13430 pump assembly comes with the 318 rinse pump and all the hoses attached.

  46. Section

    The Herkules Retrofit Pump Kit (#21155) contains all seventeen (17) of the components required to install a bypass into the G550 Paint Gun Washer. Allowing for an improvement of performance for the Gun Washer Unit, this kit allows you to solve any issues/upgrade your unit with ease.

    The kit provides these parts: 1007592 (1) timer mechanical w/o knob, M230-003 (1) cam – timer 11 GA. mild steel, M230-004 (2) spacer .3125 OD x .115 ID x .25 NYLN, M230-005 (1) spacer .50 OD x .257 ID x .125 NYLN, M230-006 (2) screw PHSM phil #4 X 5/8 Z, M230-002 (1) knob for mechanical timer, 002-161 (1) washer flat .5625 OD X .252 ID X .045, M230-007 (1) spacer 1/2 OD .257 ID Nylon, 1002414 (1) sticker timer on/off for gun washer, M1C (1) valve limit bottom ports, 002-171 screw BHSC 8-32 X 1 black, 002-172 (2) nut nylock 8-32 Z, 1000852 (1) tee PTC 5/32, 810-109-4 (6) tie cable 4 inch black, 19482 (1) hose 5/32″ blue 5 foot coil, 1003058 (1) owners manual for G520, 1012280 (1) installation instructions for 21155.

  47. Section

    The Herkules Retrofit Pump Kit (#21197) contains all seventeen (17) of the components required to install a bypass into the G550 Paint Gun Washer. Allowing for an improvement of performance for the Gun Washer Unit, this kit allows you to solve any issues/upgrade your unit with ease.

    The kit provides these parts: 1007592 (1) timer mechanical w/o knob, M230-003 (1) cam – timer 11 GA. mild steel, M230-004 (2) spacer .3125 OD x .115 ID x .25 NYLN, M230-005 (1) spacer .50 OD x .257 ID x .125 NYLN, M230-006 (2) screw PHSM phil #4 X 5/8 Z, M230-002 (1) knob for mechanical timer, 002-161 (1) washer flat .5625 OD X .252 ID X .045, M230-007 (1) spacer 1/2 OD .257 ID Nylon, 1002414 (1) sticker timer on/off for gun washer, M1C (1) valve limit bottom ports, 002-171 screw BHSC 8-32 X 1 black, 002-172 (2) nut nylock 8-32 Z, 1000852 (1) tee PTC 5/32, 810-109-4 (6) tie cable 4 inch black, 19482 (1) hose 5/32″ blue 5 foot coil, 1003108 (1) owners manual for G550, 1012280 (1) installation instructions for 21197.

  48. Section

    This 338 diaphragm pump powers the Herkules G520 Paint Gun Washer. The 21349 pump assembly comes with all the hoses for the solvent side of the paint gun washer.

  49. Section

    This 338 diaphragm pump powers the Herkules water side of the G520 Paint Gun Washer. The 21350 pump assembly comes with all the hoses for use with the pressure wash and manual brush.

  50. Section

    The 11243 is a clean water intake filter with a straight fitting. This is attached to the 338 pump hose on the water side.  Used on G100 and G520.

  51. Section

    The 13053 Filter is a recirculating solvent filter with an elbow fitting for the Paint Gun Washers G510, G520, and G550.

  52. Section

    The 13901 is a simple steel platform that allows operators to place their paint guns while manually cleaning them using the brush assembly. The platform is perforated to allow all liquid to drain into the tub of the gunwasher.

  53. Section

    The 21142 is a water filter intake assembly for the shroud clean rinse cycle on the G520. It includes the screen filter, hose, and fitting.

  54. Section

    The 21254 Timer knob replacement kit comes with five lightweight plastic timer knobs that easily attach to the gun washer timer assembly.

  55. Section

    The 21351 kit is the full actuator rod assembly. The actuator rod is used to ensure the Herkules G520 paint gun washer lid is fully closed in order for the gunwasher to clean automatically. Once the lid is lifted, the actuator rod will disengage and stop the gunwasher unit from operating. To resume the cleaning process, simply close the lid.

  56. Section

    The 21356 is used on the G520 water side known as the rinse/agitator switch. The 21356 kit is the toggle valve with all the fittings attached.

  57. Section

    This is a one way check valve for agitator air on the G520.

  58. Section

    1000852 is a tee ptc 5/32. Two of these tees are used on the G520 to divert washer water from the pump to the pressure washer and brush fixtures in the shroud.

  59. Section

    1002572 is just the rod wihthout the assembly. The actuator rod is used to ensure the Herkules G520 paint gun washer lid is fully closed in order for the gunwasher to clean automatically. Once the lid is lifted, the actuator rod will disengage and stop the gunwasher unit from operating. To resume the cleaning process, simply close the lid.

  60. Section

    The 1002643 part is a brass bulkhead  3/4-16uns x 1/4 NPT W/nut. Used on G202, G205, G210, G375, G507, G511, G550.

  61. Section

    The T25 is a G520 air intake fitting for the 338 water pump. This is also used for the water side 3 shroud intakes (clean rinse, pressure wash, and brush).

  62. Section

    Connector for the M5 hose (works on the blue, black, and neutral M5). Can be found on most gun washers.